Difference between revisions of "CapsLock Remap Howto"
|Line 50:||Line 50:|
=== Windows ===
=== Windows ===
Go here [http://www.microsoft.com/technet/sysinternals/Miscellaneous/Ctrl2Cap.mspx Sysinternals ctrl2cap].
[http://www.microsoft.com/technet/sysinternals/Miscellaneous/Ctrl2Cap.mspx Sysinternals ctrl2cap].
=== Linux Console ===
=== Linux Console ===
Revision as of 10:42, 18 June 2013
Caps Lock is stupid.
- 1 CapsLock is Satan
- 2 NoCaps!
- 3 X11
- 4 X11 Gnome/Ubuntu
CapsLock is Satan
How often do you need to type in all caps? The CapsLock key may not be the most useless key on the keyboard -- I'd vote for the Print Screen key, but the CapsLock is certainly the most annoying key. Plus it is a big key and in prime real estate. This is a valuable set of attributes that should be reserved for a key that you hit often (Enter, Shift, Control, Delete, etc.).
On most PC keyboards the CapsLock key is where the Ctrl key should be. Whenever I get a new keyboard or laptop, I always pop off the key then take a razor blade and scrape off the "CapsLock" print. I then tweak my operating system so that it thinks this key is a Ctrl key. Some people like to make it an additional Esc key.
Some people believe that IBM took the original computer terminal keyboards and replaced the Ctrl key with the CapsLock key in order to make their first home computer, the IBM PC, appear more familiar to people who were accustomed to typewriters. This is false. In fact, the first IBM PC's had the Ctrl key to the left of the A. Later on, IBM released the IBM PC/AT with a CapsLock favored keyboard. Other people blame Microsoft because they pushed all those other useless keys on the world. There is also a bit of a myth that the old mainframe keyboards were consistent in putting the Ctrl key to the left of the A. Actually, the original PC keyboards were the anomaly. Prior to the PC most printing and display terminals had the CapsLock in the position where it is today. This includes classics such as the DEC VT52 and VT100 terminals; IBM data display terminals such as the IBM2741 and IBM5253. Many of IBM's early small computers that predate the IBM PC had a mix of keyboard styles. Many non-PC personal computers of the time had the CapsLock to the left of the A: TRS-80, BBC Micro, Osborne 1, Commodore Vic-20, and Commodore C=64. The Apple ][ series had the Ctrl key in the proper location to the left of the A key, but sadly, the original Macintosh did not -- it was afflicted with the CapsLock (and this was before the IBM PC/AT went to the Enhanced keyboard). The Atari computers had the proper Ctrl key, but their keyboards were horrible membrane things. The BeBox (BeOS) had CapsLock; Next had Ctrl.
The follow section explains ways to turn the CapsLock key into something useful. I like to turn it into a Control key, so these examples show that. Other reasonable keys that people redefine CapsLock as are Escape, and Backspace.
This nocaps script is part of my personal ~/bin/ directory.
#!/bin/sh # This temporarily remaps the CapsLock key to a Control key. # The keyboard will return to the previous settings after a # reboot. The Linux console and the X Window system each # handles keypresses separately, so each must be remapped # separately. First remap the X keyboard since this does not # require root access. # Remap the CapsLock key to a Control key for # the X Window system. if type setxkbmap >/dev/null 2>&1; then setxkbmap -layout us -option ctrl:nocaps 2>/dev/null fi # You have to be root to remap the console keyboard. if [ "$(id -u)" != "0" ]; then echo "This script is not running as root so" echo "the console CapsLock cannot be remapped." echo "Perhaps you forgot to run this under sudo." echo "Note that this problem does not effect X." echo "This only effects the consoles running on" echo "Alt-f1 through Alt-f6." exit 2 fi # Remap the CapsLock key to a Control key for the console. (dumpkeys | grep keymaps; echo "keycode 58 = Control") | loadkeys
Go here Sysinternals ctrl2cap.
This was the old URL: Sysinternals ctrl2cap.
Now it seems that everything is in /etc/default/keyboard or in /etc/default/console-setup. Edit one of these files, and find and modify the XKBOPTIONS line. It also seems that the console now uses the same X Window configuration.
You might need to run:
sudo dpkg-reconfigure -phigh console-setup
All the stuff under /etc/kbd/ is ignored if you have console-setup installed... It's all very confusing.
You just need to remap keycode 58 from "Caps_Lock" to "Control" then load using loadkeys. Many Linux distros actually have hooks in place to do this for you. This is the command that will do the trick -- if you run as root and if you are at a console.
(dumpkeys | grep keymaps; echo "keycode 58 = Control") | loadkeys
Or this equivalent command:
dumpkeys | sed 's/\s*58\s*=\s*Caps_Lock/ 58 = Control/' | loadkeys
If you get the following message then it means you didn't run `dumpkeys` or `loadkeys` as root:
Couldn't get a file descriptor referring to the console
On some systems I am seeing this now printed as CtrlL_Lock.
I put this in my Bash alias file:
alias nocaps='sudo dumpkeys | sed "s/\s*58\s*=\s*Caps_Lock/ 58 = Control/" | sudo loadkeys'
Most distros put these types of commands into a keymap file. The keymap files are stored in different places depending on your version of Linux. It is sometimes called defkeymap or remap.
Newer Ubuntu 8.10 Intrepid
Simply uncomment the line s/keycode 58 = Caps_Lock/keycode 58 = Control/; in this file:
Ubuntu before 8.10 Intrepid
The keyboard maps in Ubuntu are stored here:
Red Hat Enterprise 4
On Red Hat Enterprise 4 the file is stored here:
old script to fix defkeymap on Ubuntu
The following script takes care of this for Ubuntu Linux:
#!/bin/sh echo "transmogrify the Caps_Lock key into another Control key" gunzip /usr/share/keymaps/i386/qwerty/defkeymap.kmap.gz sed -i -e "s/Caps_Lock/Control/" /usr/share/keymaps/i386/qwerty/defkeymap.kmap gzip /usr/share/keymaps/i386/qwerty/defkeymap.kmap loadkeys -d
This can also be done through console-tools. Edit '/etc/console-tools/remap' and uncomment 'keycode 58'.
When running XWindows you need to modify the X11 key map using xmodmap. It is not sufficient to just modify the console keyboard mapping. Use xmodmap to load the following keymap file (save in ~/.Xmodmap):
remove Lock = Caps_Lock keycode 0x42 = Control_L add Control = Control_L
make these changes persistent
These keyboard settings are not persistent after a reboot. Most Linuxes will load your ~/.Xmodmap file when you login with xdm or gdm. Some don't. If not then you should add this line to your ~/.xsession and ~/.xinitrc files (after the shebang #!/bin/sh line):
[ -f ~/.Xmodmap ] && xmodmap ~/.Xmodmap
Go to you main panel menu and select the following to get to the CapsLock as Ctrl option:
System Preferences Keyboard --> ''opens "Keyboard Preferences" dialog'' Layouts tab Layout Options... Ctrl key position Make CapsLock an additional Ctrl.