SSH config

Revision as of 13:08, 2 March 2015 by Root (Talk | contribs) (Client side: /etc/ssh/ssh_config or ~/.ssh/config)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

SSH config tweaks

Most default SSH installations need a little tweaking for speed or extra security. There are two config files of interest. One is for the SSH server on the host accepting connections and the other is for the SSH client on your localhost.

Server side: /etc/ssh/sshd_config

These are changes I always make to /etc/ssh/sshd_config. See also fail2ban for protecting against scripts doing dictionary attacks.

# This speeds up logins.
UseDNS no
# TCPKeepAlive is dumb. It may seem counterintuitive to shut it off, 
# but it will actually force sessions to terminate after a timeoutf.
# The ClientAlive settings are probably closer to 
# what most people expect when they think of "keep alive".
TCPKeepAlive no
# Client Alive messages are sent over the encrypted link, so they
# cannot be blocked or spoofed by a firewall. These settings tell
# the server to check the client every 30 seconds. If the client
# does not respond 40 times in a row then the session is closed.
# This allows for up to 20 minutes of network interruption.
ClientAliveCountMax 40
ClientAliveInterval 30

# Do not set MaxAuthTries to '''1''' because SSH first tries
# public key authentication which counts against the number
# of failed tries, so if the key fails then sshd will disconnect
# and never attempt to ask for a password.
MaxAuthTries 2
# Bot scripts often check these accounts for weak passwords:
DenyUsers root test admin guest nobody www www-data
# For extra security, allow access only to specific users.
# Replace "user1 user2 user3" with a list of users to allow.
#AllowUsers user1 user2 user3

# Needed for VPN.
PermitTunnel yes

# Allow client to pass locale environment variables.
AcceptEnv LANG LC_*

Use the following to support SSH1 only if you need it. SSH1 is ancient history and should be avoided. Unless you know you need this then you don't need this.

# this is required if you want to support SSH1
Protocol 2,1
# this is required if you want to support SSH1
PasswordAuthentication yes

Client side: /etc/ssh/ssh_config or ~/.ssh/config

Edit the client SSH config if you are getting slow logins. This is usually caused by GSSAPI Authentication.

Host *
# This fixes slow logins. Don't use this if you use Kerberos or GSSAPI.
GSSAPIAuthentication no
# This helps prevent disconnects. Equivalent to the ClientAlive* settings on the serve
ServerAliveInterval 60
ServerAliveCountMax 120
# This is counter-intuitive. TCPKeepAlive should be set to no to help eliminate disconnects.
TCPKeepAlive no
# Allow agent authentication to chain through more than one server.
ForwardAgent yes
# This is equivalent to -X `ssh` option -- limited X11.
ForwardX11 yes
# This is equivalent to -Y `ssh` option -- unlimited X11. This can be compromise security.
# Note that both ForwardX11 and ForwardX11Trusted must be set to yes to silently compromise security.
# If you set only ForwardX11Trusted to yes then you still must use the '-Y' option on the ssh command-line.
#ForwardX11Trusted yes
# This passes some environment variables along to the remote host.
SendEnv LANG LC_*

Remote Server Security Enhancement with SSH Keys

You can make port forwarding even more secure by limiting what a privileged account can do. When you add a key to the authorized_keys file you may add parameters to limit what clients using that key are allowed to do. The following example allows the client to create only IMAP tunnels. On the remote server add the following to ~username/.ssh/authorized_keys:

ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA8XIr8LEXdvc4VZEvNenWkJrerTzNhqTT7QvCD+Y2EjCUPQwfBcSnvhY3oasNigNonghQFqm7/HqWBLpcN+4mqDUrXrEdj6HQmHvCV6WozNUVb5jjiyQ/JF4hqcQd6oelCkVw8wD32I2jlYqydpqOGY4xqakWDAfm3SOx5il3Kl49mKCg5B3GQPexhTujaTT3y/Q1eeT3zGpHE9Mp7k20X8rMxSjp5ncLAmdf42fRh05HY5f1GrupQIEdi0/TDcPNWL1ml89zttrDOLgDnwny7P0x2jmcX41cSxL/8svER7BAk2sroyQe6L21pJ7o2MYz1IwnsQgji/GjJoaA7hTNCQ==

This is what each parameter means:

  • from="": accept connection only from the given IP address
  • command="/bin/false": force this command to be run -- ignore what is requested by the client
  • no-pty: never allocate a PTY for interactivity
  • no-X11-forwarding: No X11
  • no-agent-forwarding: we don't want or need ssh-agent
  • no-port-forwarding: prevent ssh -R ..., but not sss -L ...
  • permitopen="localhost:143": allow only localhost connections to port 143 for `ssh -L` requests